Hammer mill and double rotor
with oscillating hammers
Previous
Next
Type "Rotodue 4M-GX"
Input feed: less than 100 mm
Fineness range:0 ÷ 3 mm
Throughput: up to 70 t/hour
Scheda tecnica
Download
Applications:
The dual-rotor configuration of the ROTODUE 4M – 4MXP – 4GX – 4GZ hammer mills offers attractive advantages:
- It doubles, for the same mill width, the volume of the grinding chamber and the discharge area of the screen. The result is increased production and flow rate of hot gas for drying.
- High peripheral speeds can be maintained.
- By appropriately choosing the type and arrangement of rotors and feed port, the mill can be adapted to many applications, even with relatively abrasive materials.
- Ideal for obtaining products smaller than 0.5 to 3 mm. depending on installation and operating conditions, with polyhedral granule shape.
- Fine grinding of friable materials of medium hardness and abrasiveness.
- Possibility of simultaneous drying by hot air input.
- Sturdy construction and easy maintenance.
- Production of fine limestone and dolomite powders and sands for glassware, premixed mortars, plasters, and agglomerated floors with resin or cement (0-3 mm) (0-8 mm)
- Milling clays for production of roof tiles, bricks, rustic drawn floors
- Especially suitable for grinding with simultaneous drying(ESSICOMACINATION) of wet products with moisture content 4-8% (depending on raw material)
Applications
Technical Data
| TYPE | U.M. | ROTODUE 4M GX 500 | ROTODUE 4M GZ 750 | ROTODUE 4M GX 1000 |
|---|---|---|---|---|
| Feeding mouth | mm | 300 x 570 | 300 x 780 | 300 x 1120 |
| Max feed size - with disc rotor and oscillating hammers |
mm | 40 | 40 | 40 |
| Max feed size - with heavy hammer rotor |
mm | 100 | 100 | 100 |
| Speed | rpm | 1000 ÷ 1750 | 1000 ÷ 1650 | 1000 ÷ 1650 |
| Power required | kW | 2 x 45 ÷ 55 | 2 x 75 ÷ 90 | 2 x 90 ÷ 110 |
| Production (indicative) | Ton/h | 15 ÷ 25 | 25 ÷ 35 | 40 ÷ 60 |
| Weight | Kg | 5000 | 7000 | 10000 |
Scheda tecnica
Download