Skip to content

Machinery and equipment

Polverizzatore PPS Cimma per la micronizzazione di materiali

Micronizer mill with air selector “PPS” series

Micronization mill with air selector "PPS" series is designed for fine and very fine grinding of chemical and plant materials, including abrasive materials, with precise particle size distribution from 10 to 200 microns. Built-in dynamic selector, low heat generation. The air drawn through the mill can be chilled to process heat-sensitive products.

Input power supply: 0 to 10 mm
Fineness range: 0 ÷ 40 micron
Flow rate: 500 to 3000 kg/hour
SV micro cimma impianto

Micronizing mill with dynamic selector switch type “SV MICRO”

Micronization mill with dynamic selector type "SV MICRO," designed for fine and very fine micronization of minerals, chemicals and plants. The dynamic particle size selection system allows precise adjustment in the 15-100 micron range. The air sucked through the mill can be heated to dry wet products, or cooled to treat heat-sensitive products.

Input power supply: 0 to 10 mm
Fineness range: 15 ÷ 100 microns
Scope: 300 to 3000 t/hour
rotodue4mgx 03

“ROTODUE 4M-GX” hammer and double rotor mill

Mills suitable for materials of medium hardness and abrasiveness, ideal for intermediate grinding with high production of fine powders. Perfect for combined drying and grinding processes. Processes calcium carbonate, dolomite, coke, lime, gypsum, clays and brick waste. Also available in a version with integrated drying.

Input power supply: less than 100 mm
Fineness range:0 ÷ 3 mm
Scope: up to 70 t/hour
contrarotorc30 cimma

“Contrarotor C30” Cryogenic Peg Mill

The "Contrarotor C30" double counter-rotating peg mill is designed for cryogenic grinding of plastics, rubbers and temperature-sensitive products. It uses liquid nitrogen to obtain fine powders from polyurethanes, EVA, Viton and oily foods. Stainless steel frame and parts for cryogenic grinding.

Input power supply: 0 to 8 mm
Fineness range: 50 to 500 microns
Flow rate: 100 to 300 kg/hour
rotounomgx 01

Hammer mill and single rotor type “ROTOUNO M-GX”

The Hammer and Single Rotor Mill type "ROTOUNO M-GX" is suitable for grinding and drying soft and medium-hard minerals such as gypsum, talc and dolomite. It produces up to 80% under 1 mm. Sturdy, reversible, with wear-resistant hammers and adjustable grid, it guarantees high yield and quick maintenance. Also available in a version with integrated drying.

Input power supply: less than 100 mm
Fineness range: less than 3 mm
Scope: up to 35 t/hour
impianto essiccazione

Rotary drum dryer

Cimma rotary dryers, customized for each material, offer countercurrent or equicurrent drying modes and direct or indirect heating. Built with single or double cylinders, they ensure thermal efficiency and easy maintenance. Comprehensive accessories support feeding, discharging and safety. Reliable and flexible solutions for every industrial need.

Scope: 5 to 50 t/hour
Maximum humidity: 5 to 30%
Thermal capacity: from 500,000 KCal/hour to 5,000,000 KCal/hour
mulino martelli fissi combi cimma

“COMBI” type fixed hammer mill

The COMBI fixed-hammer mill is designed for grinding at intermediate fines with high production of fine parts from materials such as clays, limestone, coke, and ceramic scraps. Rugged, wear-resistant, with fixed hammers on 4 edges and adjustable grid, it is ideal for high-yield plants.

Input power supply: up to 200 mm
Fineness range: 0 ÷ 3 mm
Scope: up to 70 t/hour
mulino urto martelli rigidi

P-Series Bump Mill

The P version impact mill with rigid hammers is designed for the production of fine sands and powders with constant grain size. Suitable for grinding limestone, marble, clay, gypsum and other friable materials. Ideal for premixes, ceramics, special plasters. Excellent reliability, low consumption and long operating life. Also available in a version with integrated drying.

Input power supply: up to 30 mm
Fineness range: 0 ÷ 3 mm
Scope: up to 12 t/hour
cimma polverizzazione mulino polveri superfini sf75 foto

“SF” type cell pulverizer mill

SF-type cell pulverizer mill for fine grinding and micronization of nonabrasive materials such as plastics, elastomers, grains, gypsum, metal oxides and calcium carbonate. High efficiency due to technologies such as impact, shear and turbulence. Ideal for fine powders and continuous production. Also available in a version with integrated drying.

Input power supply: 0 to 10 mm
Fineness range: 20 ÷ 100 micron
Flow rate: 0.3 ÷ 2 t/hour
rompigrumi RG

Rompigrumi “RG”

The RG Breaker, designed especially for the chemical and food sectors, is easily installed under silos to break up agglomerates and regularize the size before pneumatic conveying. It can also be used on plants as the main crushing machine. Made of carbon or stainless steel, it is easy to maintain, with interchangeable combs and an automatic stop device.

Input power supply: up to 200×200 mm
Fineness range: less than 15 mm
Scope: up to 5 t/hour
impatto serie IIA-III-IV-V-VS-01

IMPACT Mill

The IMPACT mill crushes hard and wet materials such as clay, dolomite, and industrial waste. Without a screen, it avoids clogging and reduces wear and tear. Adjustable and sturdy, it is ideal for primary crushing in construction, ceramics and foundry.

Input power supply: 250x250mm
Fineness range: less than 30 mm
Scope: up to 120 t/hour
mescolatore TPmix

TP MIX twin-shaft paddle mixer

The TP MIX twin-shaft paddle mixer ensures homogeneous mixtures in less than 60 seconds, even with microadditives. Ideal for fragile materials and viscous liquids, it is suitable for many industries. Sturdy construction, low energy consumption, easy maintenance and quick discharge without segregation.

Nominal capacity: batches of 20 to 5,000 liters
Immagine di copertina del polverizzatore Seriex prodotto da Cimma

“X” type impact mill

The type "X" impact mill is a versatile machine for grinding medium-hard dry materials in food, chemical and industrial applications. Made of stainless steel or cast iron, it is suitable for low production with grain sizes from 0.1 to 5 mm. Also available in an ATEX version.

Input power supply: up to 50 mm
Fineness range: less than 3 mm
Scope: up to 2 t/hour
cimma frantumazione sminuzzatore sm400

“SM” shredder

The SM Crusher is designed for crushing hard, wet or dry clays and agglomerated materials. Equipped with two harpooned cylinders at different speeds, it effectively reduces clods and agglomerates by preparing them for grinding. Sturdy structure, anti-wear system and easy maintenance.

Input power supply: 250x250mm
Fineness range: less than 30 mm
Scope: up to 120 t/hour
frantoio a pettine RIP

Single and double rotor comb crusher “RIP”

The RIP series comb crusher is ideal for crushing materials of low and medium hardness and agglomerates. Equipped with single or double toothed comb rotor, it processes even wet and large materials.

Input power supply: 250x250mm
Fineness range: less than 25 mm
Scope: up to 80 t/hour
essiccazione mulino urto

D series impact mill

The "D"-series impact mill with oscillating hammers is ideal for crushing bulky and medium-hard materials. Used to produce sand, grit and recycled materials. Used in the ceramic, brick and gypsum processing sectors. Strong structure, easy maintenance, durable even with slightly abrasive materials. Also available in a version with integrated drying.

Input power supply: up to 150 mm
Fineness range: less than 10 mm
Scope: up to 15 t/hour
mulino premacinatore no griglia rotouno mxp

Rotouno Mill MXP

Grille-free grinding mill for abrasive materials such as porcelain stoneware, granite, limestone, dolomite and glass. Chrome wear-resistant alloy construction, reversible hammers, bidirectional rotation and easy maintenance. High output and ideal for grinding hard and refractory waste.

Input feeding: 0 ÷ 200 mm plates up to 700×700 mm
Fineness range: 10 ÷ 20 mm
Flow rate: up to 40 t/h
Impianto Cimma con mulino a cilindri tipo RII

Roller mill R II

Machines suitable for grinding medium-sized materials by crushing with the need for low percentages of fine powder (coal, fertilizer, chemicals, glass, granite, and bone).

Input feed: up to 30 mm
Fineness range: less than 1 mm
Throughput: up to 50 t/hour
mulino martelli leggeri griglia rotante bl72

Hammer mill and rotary screen “BL” series

The BL series hammer mill is designed for grinding grain, wood chips, locust beans and feed. Sturdy construction, adjustable feed and hammers on 4 sides. Suitable for nonabrasive products, can include magnetic plate and collect by gravity or pneumatic conveying.

Input power supply: up to 100 mm
Fineness range: less than 5 mm
Scope: up to 5 t/hour

Pulverizer mill type “CP”

The CP series pulverizer mill with air selector is ideal for producing powders with precise particle size distribution between 15 and 80 microns. Designed for easy cleaning with immediate access to internal parts.

Input power supply: 0 to 8 mm
Fineness range: less than 30 microns
Scope: up to 3000 t/hour
cimma classificazione aria separatore vento aervortex 01

“AERVORTEX” wind separator

The AERVORTEX Wind Separator combines air current and centrifugal force to separate fine and coarse fractions. Self-ventilated, it reduces consumption and improves mill performance. Ideal for ceramics, solid fuels, construction and mining, it ensures consistent particle size and high productivity in dry mills.

Separation cut: 80 to 150 microns
Scope: 1 ÷ 45 t/hour
microseparatore vento cimma

Microseparator “MS”

MS microseparators extract fine powders from dry materials with separation cuts from 10 to 60 microns. Adjustable and low-maintenance, they ensure particle size consistency and high efficiency. Ideal for industrial applications requiring precise and flexible selection of fine particles.

Separation cut: 10 to 60 microns
Scope: 1 ÷ 8 t/hour
mulino pioli c60

“Contrarotor C60” Peg Mill

The "Contrarotor C60" double counter-rotating peg mill is designed for fine grinding of low abrasive materials such as calcium carbonate, grains, chemicals and foodstuffs, even with small parts of grease and oil. Equipped with double counter-rotating impeller, it ensures high yield and consistent quality. Cast iron body, also in stainless steel upon request.

Input power supply: 0 to 8 mm
Fineness range: 50 to 500 microns
Flow rate: 500 to 2000 kg/hour
rotodue4c 01

“ROTODUE 4/C” type double-rotor hammer mill with dynamic air selector

The double-rotor hammer mill type "ROTODUE 4/C" with dynamic air selector is ideal for grinding and drying friable materials such as coke, gypsum, calcium carbonate and talc. It produces ventilated powders up to 300 microns. Sturdy, adjustable and compact, it saves energy and reduces plant footprint.

Input power supply: 0 to 20 mm
Fineness range: 0 ÷ 100 mm
Scope: up to 10 t/hour
polverizzazione essico-macinazione impianto

Pendular mill roller track type PD

The PD-type pendular track and roller mill stands out for its operational efficiency, fineness adjustment (20-400 microns) and compatibility with chemical and mineral materials of medium hardness. Also available in a version with integrated drying, it is ideal for grinding friable materials, including wet materials, such as clay, kaolin, calcium carbonate, bentonite and dolomite.

Input power supply: 0 to 20 mm
Fineness range: 40 to 300 microns
Scope: 5 ÷ 20 t/hour