Single and double rotor comb crusher
Previous
Next
Type "RIP"
Input feed: 250×250 mm
Fineness range: less than 25 mm
Throughput: up to 80 t/hour
Fineness range: less than 25 mm
Throughput: up to 80 t/hour
Scheda tecnica
Download
Applications:
The RIP series comb crusher is suitable for the initial crushing of agglomerated materials into clumps or lumps that are not excessively hard and tough, such as clay, bentonite, chemicals, and foundry soils.
It consists of a toothed cylinder, which pushes the material through a fixed comb with an adjustable distance.
The special arrangement of the teeth on the cylinder allows the RIP crusher to receive blocks of considerable size relative to the size of the machine.
The type of operation also makes it suitable for very wet materials.
The control can be equipped with a safety device that stops the crusher in the presence of bodies of excessive hardness within the material.
Applications
Technical Data
| Type | MU. | 1/400 | 1/600 | 1/800 | 1/800/2 | 2/1000 |
|---|---|---|---|---|---|---|
| Maximum rotor diameter | mm | 370 | 370 | 370 | 370 | 600 |
| Useful width | mm | 400 | 600 | 800 | 800 | 1000 |
| Power required | kW | 5,5 | 7,5 | 7,5 | 2×7,5 | 15 |
| Noise (1 m) | dB | 85* | 85* | 85* | 85* | 85* |
* Value may change depending on working conditions
Scheda tecnica
Download