Construction sector

Advanced technologies for the modern construction industry

Cimma develops plant solutions for the construction industry, ideal for processing construction materials through crushing, grinding and particle size selection. Our plants make it possible to obtain products with precise technical characteristics, optimizing production processes and ensuring high performance on construction sites and in industrial production.

Key players in the field:

Calcium carbonate

Dolomite

Carbonate filler

Chalk

Rubble

Tiles

Bricks

Tiles

Cimma machines: versatile solutions for preparing building materials

The machines and plants designed by Cimma offer the versatility needed for the preparation of a wide range of materials used in construction. We are able to provide technologies for processing traditional elements such as solid bricks, roof tiles, hollow bricks, extrusions for ventilated facades, and tiles, optimizing the crushing and preparation processes of clays, including with dry-milling systems.

In addition, our solutions are also suitable for crushing rubble from recycling, contributing to more sustainable construction. But our expertise also extends to the preparation of powdered additives and the production of premixes such as mortars, ensuring homogeneity and consistent quality for large construction companies.

Micronizing mill with dynamic selector switch type “SV MICRO”

Micronization mill with dynamic selector type "SV MICRO," designed for fine and very fine micronization of minerals, chemicals and plants. The dynamic particle size selection system allows precise adjustment in the 15-100 micron range. The air sucked through the mill can be heated to dry wet products, or cooled to treat heat-sensitive products.

Input power supply: 0 to 10 mm
Fineness range: 15 ÷ 100 microns
Scope: 300 to 3000 t/hour

Vai alla scheda

“ROTODUE 4M-GX” hammer and double rotor mill

Mills suitable for materials of medium hardness and abrasiveness, ideal for intermediate grinding with high production of fine powders. Perfect for combined drying and grinding processes. Processes calcium carbonate, dolomite, coke, lime, gypsum, clays and brick waste. Also available in a version with integrated drying.

Input power supply: less than 100 mm
Fineness range:0 ÷ 3 mm
Scope: up to 70 t/hour

Vai alla scheda

Hammer mill and single rotor type “ROTOUNO M-GX”

The Hammer and Single Rotor Mill type "ROTOUNO M-GX" is suitable for grinding and drying soft and medium-hard minerals such as gypsum, talc and dolomite. It produces up to 80% under 1 mm. Sturdy, reversible, with wear-resistant hammers and adjustable grid, it guarantees high yield and quick maintenance. Also available in a version with integrated drying.

Input power supply: less than 100 mm
Fineness range: less than 3 mm
Scope: up to 35 t/hour

Vai alla scheda

Rotary drum dryer

Cimma rotary dryers, customized for each material, offer countercurrent or equicurrent drying modes and direct or indirect heating. Built with single or double cylinders, they ensure thermal efficiency and easy maintenance. Comprehensive accessories support feeding, discharging and safety. Reliable and flexible solutions for every industrial need.

Scope: 5 to 50 t/hour
Maximum humidity: 5 to 30%
Thermal capacity: from 500,000 KCal/hour to 5,000,000 KCal/hour

Vai alla scheda

“COMBI” type fixed hammer mill

The COMBI fixed-hammer mill is designed for grinding at intermediate fines with high production of fine parts from materials such as clays, limestone, coke, and ceramic scraps. Rugged, wear-resistant, with fixed hammers on 4 edges and adjustable grid, it is ideal for high-yield plants.

Input power supply: up to 200 mm
Fineness range: 0 ÷ 3 mm
Scope: up to 70 t/hour

Vai alla scheda

P-Series Bump Mill

The P version impact mill with rigid hammers is designed for the production of fine sands and powders with constant grain size. Suitable for grinding limestone, marble, clay, gypsum and other friable materials. Ideal for premixes, ceramics, special plasters. Excellent reliability, low consumption and long operating life. Also available in a version with integrated drying.

Input power supply: up to 30 mm
Fineness range: 0 ÷ 3 mm
Scope: up to 12 t/hour

Vai alla scheda

IMPACT Mill

The IMPACT mill crushes hard and wet materials such as clay, dolomite, and industrial waste. Without a screen, it avoids clogging and reduces wear and tear. Adjustable and sturdy, it is ideal for primary crushing in construction, ceramics and foundry.

Input power supply: 250x250mm
Fineness range: less than 30 mm
Scope: up to 120 t/hour

Vai alla scheda

“SM” shredder

The SM Crusher is designed for crushing hard, wet or dry clays and agglomerated materials. Equipped with two harpooned cylinders at different speeds, it effectively reduces clods and agglomerates by preparing them for grinding. Sturdy structure, anti-wear system and easy maintenance.

Input power supply: 250x250mm
Fineness range: less than 30 mm
Scope: up to 120 t/hour

Vai alla scheda

D series impact mill

The "D"-series impact mill with oscillating hammers is ideal for crushing bulky and medium-hard materials. Used to produce sand, grit and recycled materials. Used in the ceramic, brick and gypsum processing sectors. Strong structure, easy maintenance, durable even with slightly abrasive materials. Also available in a version with integrated drying.

Input power supply: up to 150 mm
Fineness range: less than 10 mm
Scope: up to 15 t/hour

Vai alla scheda

mulino premacinatore no griglia rotouno mxp

Rotouno Mill MXP

Grille-free grinding mill for abrasive materials such as porcelain stoneware, granite, limestone, dolomite and glass. Chrome wear-resistant alloy construction, reversible hammers, bidirectional rotation and easy maintenance. High output and ideal for grinding hard and refractory waste.

Input feeding: 0 ÷ 200 mm plates up to 700×700 mm
Fineness range: 10 ÷ 20 mm
Flow rate: up to 40 t/h

Vai alla scheda

cimma classificazione aria separatore vento aervortex 01

“AERVORTEX” wind separator

The AERVORTEX Wind Separator combines air current and centrifugal force to separate fine and coarse fractions. Self-ventilated, it reduces consumption and improves mill performance. Ideal for ceramics, solid fuels, construction and mining, it ensures consistent particle size and high productivity in dry mills.

Separation cut: 80 to 150 microns
Scope: 1 ÷ 45 t/hour

Vai alla scheda

polverizzazione essico-macinazione impianto

Pendular mill roller track type PD

The PD-type pendular track and roller mill stands out for its operational efficiency, fineness adjustment (20-400 microns) and compatibility with chemical and mineral materials of medium hardness. Also available in a version with integrated drying, it is ideal for grinding friable materials, including wet materials, such as clay, kaolin, calcium carbonate, bentonite and dolomite.

Input power supply: 0 to 20 mm
Fineness range: 40 to 300 microns
Scope: 5 ÷ 20 t/hour

Vai alla scheda

Efficiency and precision in the production of premixes and additives

In the production of premixes and additives for construction,efficiency and precision are crucial factors in ensuring the performance of final materials. Cimma offers equipment designed for fine grinding, homogeneous mixing and accurate dosing of powdered ingredients. Our machines ensure the production of mortars, plasters, adhesives and other premixed products with consistent characteristics and high performance.

Customized solutions for different production needs

We understand the diversity of needs within the construction industry, from small businesses to large material production industries. Therefore, Cimma develops customized solutions that are tailored to the specific needs of each customer. Whether it is pilot and compact plants or complete lines for the preparation of raw materials for ceramics, our ability to design tailor-made machines and plants guarantees efficiency, reliability and an optimal return on investment.

Cimma: your technology partner to build the future of construction

If you operate in the construction industry and are looking for advanced technologies for preparing materials, producing premixes and additives, or recycling rubble, Cimma is the ideal technology partner. With our experience and range of innovative machines and equipment, we are ready to support the success of your business, helping to build a more efficient and sustainable future of construction. Contact us to find out how our solutions can enhance your projects.